
What Bifold Patio Doors with Screens Are and Why They Need Planning
Bifold patio doors with screens combine a folding glass door, whose panels fold and stack to one side of the opening, with a separate insect screen. When the glass is folded back, the screen closes across the opening, letting air in while keeping flies, mosquitoes and other insects out.
What Bifold Patio Doors with Screens Actually Are
Many people searching for folding patio doors with screens picture a mesh panel built into each glass leaf. In practice, the screen is its own system. It has its own housing, its own track and its own guide rail, all fitted in or around the opening. The glass panels fold along their track, and the screen runs across the opening on a separate one. You open the doors first, then draw the screen.
This matters because the door and the screen can come from different makers, have different warranties and need different measurements. Treating them as one product is how many buyers end up with a screen that doesn't suit their door.
The Two Reasons People Search for This
Most readers fall into one of two groups. Some are buying new folding patio doors and want the screen planned in from the start. Others already own a bifold and want to add a screen to it. This guide covers both. It starts with screen types and door configuration, which apply to everyone, then covers the new-door path, then retrofits.
Timing matters more than many buyers expect. US manufacturer Andersen states that its Big Door retractable screen must be installed at the same time as the door, because the screen is built into the rough opening. When a door maker has a rule like this, owners who skipped the screen at installation usually end up looking at retrofit options instead.
Why Screens and Bifolds Pull in Opposite Directions
People choose bifolds for a wide, clear opening between the living area and the deck or alfresco. A screen puts hardware back into that opening. Depending on the system, it can add:
- A housing or cassette that holds the mesh when it is retracted
- Side guide tracks or a top track that the screen runs along
- A floor rail or sill guide at the threshold
- A meeting stile where two screens close against each other on wider openings
Each of these affects the view, the threshold and how easily people, pets and furniture move through the opening. Screen types differ a lot in how much of this hardware they add, so comparing the types is the best place to start.
Screen Types That Work with Bifold Openings
Screen systems for bifold openings range from almost-invisible cassettes to simple magnetic curtains. They differ in how they open, where they go when you don't need them and how wide an opening they can cover. The table compares them side by side, and the sections below explain each one.
| Screen type | How it opens and closes | Footprint when retracted | Best-fit opening | Main trade-offs |
|---|---|---|---|---|
| Retractable roller screen | Mesh pulls out of a spring-loaded cassette and winds back onto a roller | Slim housing at one side or at the head, with the mesh hidden inside | Single or double door widths. Wider spans may need two screens | Roller size and spring tension limit the width. Mesh has to be light enough to coil cleanly |
| Pleated (plisse) screen | Accordion-folded mesh slides across on guides and stays where you leave it | Compact stack at one or both sides | Wide bifold openings | Needs a floor guide. Mesh options depend on the system |
| Sliding screen panel | Framed panel slides on tracks at the head and sill | Panel stays visible, parked beside the opening | Narrower openings or a single traffic door | Needs wall or fixed-glass space to park. Tracks run the full width |
| Hinged or French-style screen door | Framed door, single or paired, swings open on hinges | Always visible | Narrow openings, such as a traffic door | Sturdy, but the swing takes up floor or deck space |
| Magnetic or curtain screen | Mesh halves part as you walk through and magnets pull them shut | Hangs in place permanently. Can be taken down out of season | Temporary setups and rentals | Low cost, but a looser seal and a less tidy look |
| Motorised screen | A motor drives the mesh in and out at the press of a button or remote | Housing deeper than a manual cassette | Large, high or hard-to-reach openings | Needs power and cabling. More parts to service |
Retractable Roller Screens
A retractable screen stores its mesh on a roller inside a spring-loaded cassette. A side-mounted cassette draws across the opening horizontally. A top-mounted cassette drops down like a blind. When it is retracted, you see only the slim housing and its guides, so many owners choose a retractable patio screen door for a bifold they want to keep looking open.
Width is the main limit. Screen manufacturer Smartex explains that a cassette's width capacity depends on roller diameter and spring tension, so housings get bigger as openings get wider. No single industry maximum exists, and each maker sets its own. A wide bifold span that goes past that limit usually needs two screens meeting in the middle. Mesh is also limited, because the fabric has to roll up cleanly thousands of times. A heavier mesh, such as a pet-resistant type, needs a housing sized for its weight.
Pleated Screens
Pleated screens fold their mesh like an accordion. No spring pulls the mesh back, so the screen stays wherever you stop it and gathers into a compact stack. Some suppliers sell it as a foldable screen door, which matches the way the glass panels fold beside it. Pleated screens are a common choice for wide openings, so the next section covers them in detail.
Sliding Panels and Hinged Screen Doors
Framed screens give up invisibility in exchange for strength. A sliding screen panel runs on tracks at the head and sill. When it's open, it parks beside the opening, so you need a stretch of wall or fixed glass at least as wide as the panel. A hinged or French-style screen door needs clear room to swing, either onto the deck or into the living area.
Both stand up well to everyday knocks from kids and dogs. They suit narrower openings better than a full bifold span, though. A typical fit is a single traffic door within a larger folding set.
Magnetic Curtains and Motorised Screens
A magnetic curtain hangs mesh in two halves that part as you walk through and snap shut behind you. It's cheap and quick to put up, which suits renters or anyone trialling a screen over one summer. It rarely seals as neatly as a tracked system, and it stays in view all the time.
Motorised screens are at the opposite end. A motor winds the mesh in and out, which helps on large or high openings that are awkward to reach by hand. The housing needs extra depth. Smartex gives general market ranges of roughly 38 to 50 mm for manual cassettes and about 100 to 150 mm for motorised ones, and notes these are typical ranges, not fixed specs. Plan for a power supply as well, and confirm the housing size before the door frame design is finalised.
Matching a Folding Door Screen to Your Goal
- Invisible when stowed: retractable roller or pleated screen
- Durability: sliding screen panel or hinged screen door
- Low cost: magnetic or curtain screen
- Wide span: pleated screen, or two retractable screens meeting in the middle
- Convenience: motorised screen
The wide-span option involves the most decisions. On a broad bifold opening you have to choose between one screen and two, and that choice affects how the screen works every day.

Pleated Screens and Very Wide Bifold Openings
Fold back a five- or six-panel bifold and the opening can be much wider than most people expect a screen to cover. A single roller screen would need a big cassette and a strong spring to cover that span. Pleated screens avoid both problems, which is why they come up so often for wide folding door openings.
How Pleated Screens Handle Wide Spans
A pleated screen, also sold as a plisse screen, folds its mesh into narrow, even pleats. Draw the handle across and the pleats open out over the opening. Push it back and they close into a tight stack at the side.
Several traits make accordion screen doors a good match for wide spans:
- No spring tension. Nothing pulls the mesh back towards the housing. A wide pleated screen door doesn't resist you as you draw it across, and it won't snap back if you let go. It stays where you stop it.
- Compact stacking. The folded mesh takes up little width when it's open, so you keep most of the clear opening you bought the bifold for.
- Low-profile floor guides. Many systems run in a shallow guide at the threshold instead of a tall sill track, which makes the floor easier to walk across.
Pleated systems still have size limits. Each maker publishes its own maximum width and height, so check the figures for the exact system you're considering.
Single Screen or Two Screens Meeting in the Middle
If the opening is within a screen's maximum width, one screen can cover it. The screen draws from one side and closes against the far jamb. If the opening is wider than that, you need double screen doors: two screens mounted at opposite sides that close towards each other and meet in the middle. This applies to pleated and roller systems alike.
US manufacturer Andersen gives one example. Its Big Door retractable screen covers openings up to about 9.1 m wide by 3.0 m tall (30 ft by 10 ft). A single screen spans up to about 4.6 m (15 ft) wide, and wider openings use two screens meeting in the middle.
These are one manufacturer's figures for its own retractable screen. They are not an industry standard, and other systems, including pleated ones, have their own limits.
What Happens at the Meeting Point
In a double setup, the two screens close against each other at a meeting stile. The edges usually hold together with magnets or a latch. Retractable double screen doors and paired pleated screens both close this way. One US screen maker describes its paired screens rolling in from opposite jambs and latching together with magnets at the centre.
The everyday benefit is flexibility. You can open either side, so someone can step out near the kitchen while the far side stays shut. The meeting point is also the weakest spot in the setup. If the screens are poorly adjusted, a gap can open along the join, and insects are most likely to get in there. If you start finding bugs indoors, check this join first.
Wind also matters. A wide mesh has more surface area to catch a gust, and much of that load ends up at the meeting point. The same maker notes that a strong latch matters more on wider screens exposed to high winds. Coastal homes and exposed upper-storey decks feel this most, and the care section later in this guide covers how to handle it.
Width is only one part of fitting a screen. The direction the glass panels fold decides which face of the frame a screen can mount on.
How Bifold Door Configuration Decides Where a Screen Can Go
Two exterior bifold doors can be the same width and still need completely different screens. Three things decide it: which way the panels fold, where they stack, and what the threshold looks like. If you get one of these wrong, the screen you ordered may not fit at all.
Inswing Versus Outswing Bifold Doors
As a general rule, the screen mounts on the face of the frame opposite the direction the panels fold. That way the folded glass and the mesh never need the same space. On an outswing door the panels fold out onto the deck, so the screen usually goes on the interior face. On an inswing door the panels fold into the room, so the screen goes outside.
Both directions have their reasons. NanaWall notes that outswing panels save interior floor space, while inswing panels keep patios and balconies clear and suit windy, elevated sites. The drawback of inswing is that the screen lives outdoors. There it takes the full Australian sun and rain, plus salt air if you're near the coast.
| Door configuration | Usual screen location | Exposure | Things to check |
|---|---|---|---|
| Outswing bifold | Interior face | Sheltered indoors | Whether the housing clears architraves, curtains and furniture, and how far the interior handles stick out |
| Inswing bifold | Exterior face | UV, rain, wind and coastal salt air | A frame finish and mesh made for outdoor use, sill drainage, and wind on upper-storey decks |
| Panels stacking both ways | Opposite the fold, often two screens meeting in the middle | Depends on fold direction | Room for a housing at both jambs, and where the screens meet in the opening |
| Bifold with a traffic door | On the side opposite the traffic door's swing | Depends on fold direction | Whether the screen covers only the traffic door or the whole opening, and that it never blocks the door's swing |
Stacking Side and Where the Screen Housing Goes
Folded panels gather into a stack at one jamb. The stack uses up some of the opening's width and sticks out from the frame by roughly one panel width. A side-mounted cassette also needs space at a jamb. If the housing sits on the stacking side, check that the handles, locks and flush bolts on the folded panels clear it. If it sits on the far side, the mesh has to travel the full width and still close cleanly at the jamb behind the stack.
Openings that stack both ways split the glass into two stacks. That means two jambs to plan around and usually two screens. A traffic door, the single hinged leaf used for everyday access, adds one more moving part. Its handle and swing have to work whether the screen is open or closed.
Thresholds, Sill Rails and Foot Traffic
Most tracked screens add something at floor level. A raised sill rail holds the screen firmly, but it adds a lip that people can trip over. Low-profile guides are easier on bare feet and wheels. Even so, a low-profile sill is a product description, not proof that a doorway is accessible. Measure the whole cross-section: the door sill, the screen guide and the finished floor on both sides. If someone at home uses a wheelchair or walker, or the project has to meet access requirements under the NCC, have your designer or building surveyor check the threshold before you order. Keep floor guides clear of the door's drainage slots, and never cut down the door sill without the door maker's approval.
When the screen is put away, the floor looks different for each type. A retractable or pleated screen usually leaves a slim guide across the threshold. A sliding panel leaves a track along the full width. A hinged screen door needs clear floor space to swing open. A magnetic curtain leaves nothing on the floor. None of these screens will stop a toddler, a dog or a fall from an upper-storey deck. Their only job is keeping insects out.
Confirm These Before Choosing Any Screen
- Fold direction: inswing or outswing, which decides which face the screen mounts on
- Stacking side: left, right or both, which affects where the housing can go
- Stack depth: how far the folded panels stick out from the frame, and the clearance around them
- Handle and lock positions: any hardware on the panels or traffic door that could hit the housing or the mesh
- Threshold type: raised or flush sill, finished floor heights and drainage outlets
If you haven't ordered the door yet, you can still change any item on this list. That makes buying a new door the cheapest and easiest time to get the screen right.

Buying New Aluminium Bifold Doors with a Screen Planned In
A new door lets you choose the screen while the frame, threshold and stacking side are still only on the drawings. Owners of existing doors can't do that.
Factory-Matched Screens Versus Screens Added Later
Some door makers sell a screen designed for their own frame as an accessory. Often it has to go in at the same time as the door. US manufacturer Andersen requires this for its Big Door retractable screen because the screen is built into the rough opening. If you leave it off the order, you may lose that option.
Many aluminium bifold exterior doors list no screen at all. You can still fit one, but it becomes a separate product. You, your builder or your designer then has to specify it, measure for it and coordinate it with the door supplier.
Questions to Ask Before You Order
- Is a compatible screen offered for this frame, or has one been tested with it?
- Where would the screen mount for this fold direction?
- Does the opening need one screen or two meeting in the middle?
- What does the screen do to the threshold?
- Who installs the screen, and who warrants it?
Reading a Product Page for Screen Details
Product pages for aluminium bifold doors rarely cover screens, so separate what the page lists from what you still need to ask. MEICHEN's MA80 Bifold Door page is used as the example here.
| Item | What the page lists | What to ask |
|---|---|---|
| Frame | Non-thermally broken aluminium folding system, with panels that fold and stack to one side | Whole-door thermal data for your configuration. Double glazing does not make this frame thermally broken. |
| Glazing | Double glazing in 6mm+21Ar+6mm or 8mm+18Ar+8mm build-ups | Which build-up suits your opening size and safety glass requirements |
| Finish | Powder coating in Pearl White, Monument and Black Mall, with custom colours reviewed per project | Whether a screen housing can be matched to the frame colour |
| Hardware | Hardware options chosen to suit the project | Handle and lock positions relative to the screen housing |
| Screen | No dedicated screened package | Whether a compatible screen can be fitted, and where it would mount |
| Sightlines | No slim-profile dimension | Frame and stile dimensions, if slim sightlines matter to you |
| Model | MA80 in the title and system table, but MC80 in one quick-spec field | Confirm the quote is for the MA80, not the separately listed thermally broken MC80 |
Opening dimensions, folding clearance and performance all need review for the proposed configuration. The page also notes that overall frame width is not the same as the clear walk-through opening. That point matters for screens, because the screen has to cover the clear opening.
All of this assumes the door hasn't been ordered yet. If your bifold is already installed, the frame can't change, so the screen has to fit the opening as it was built.
Adding a Retractable Screen to the Bifold Door You Already Have
An installed bifold has a fixed frame, a fixed sill and panels that already stack in one set place. Any screen you add has to work around all three. You can often add retractable screens for patio doors after the door is in, but the opening itself decides how easy that will be.
Retrofit Screen Options for Existing Bifold Doors
Retrofit screens mount in one of two ways. A face-mount screen fixes its housing and guides to the face of the door frame or to the wall around it. It suits shallow or uneven reveals, but the hardware sits proud of the frame and stays in view. A reveal-mount screen fits inside the opening, between the jambs. It looks neater, but it needs enough depth and reasonably square jambs to run smoothly.
A retrofit is usually simple when the opening is square, the sill is flat and the folded stack sits well clear of the jamb where the housing will go. It gets harder with a raised door sill, a shallow reveal, an opening that has moved out of square over the years, or handles that stick out into the screen's path.
Talk to the door's maker first. Some makers require their own screen to go in with the door, as Andersen does for its Big Door screen. If yours does, ask whether it offers a later option before you buy a third-party bifold screen door. It's also worth asking whether fixing anything to the frame affects the door's warranty.
Why Retrofit Screens Are Sold by Opening Width
Retrofit sellers often sort their products by opening size. US retrofit seller Ark Design, for example, has a Standard Opening category for rough openings under 40 in (about 1,016 mm) and a Large Opening category for openings of 40 to 80 in (about 1,016 to 2,032 mm). A multi-panel patio bifold can be wider than both. Your measurement decides whether a stock size will fit or whether you need a custom size or two screens, so measure before you shop.
How to Measure an Existing Bifold Opening
Each screen maker has its own measuring sheet, and that sheet overrides general advice. US screen maker Metro Screenworks, for instance, asks that the opening be plumb, level and square, with a smooth, flat and stable surface at the bottom for mounting. For some inside-mount positions it also asks for a small deduction of 1/16 in (about 1.6 mm). Rules like these differ from system to system, so always use the sheet for the screen you're buying. The steps below get you ready to fill it in.
- Know which opening you're measuring. The rough opening is the framed hole in the wall that the door was fitted into. The finished opening is the space you see now, between the jambs, head and sill. Some sellers size by rough opening and others by finished opening, so check which one the sheet asks for.
- Measure width and height at three points each. Take the width at the top, middle and bottom, and the height at the left, centre and right. Record the smallest figure for each.
- Check for square. Measure both diagonals from corner to corner. If they don't match, write down both figures and ask the screen maker how its system handles the difference.
- Check the threshold and sill. Look for a flat, stable surface where a floor guide could sit, and note how high the door sill sits above the finished floor on each side.
- Measure the frame or reveal depth. This shows whether the track can fit inside the opening or will need to be face-mounted.
- Measure the stacked panels. Fold the door fully open. Measure how far the stack sticks out and how much clearance is left around it.
- Note anything in the way. Handles, locks, flush bolts, architraves and trim can all clash with a housing or guide.
Measure twice before you order. Photograph the opening with the door both open and closed, including close-ups of the sill, jambs and folded stack, so the supplier can spot problems your figures might miss.
Accurate measurements confirm that a retractable screen for bifold doors will fit your frame. The mesh inside it is a separate choice, and it depends more on who uses the doorway than on the door itself.

Choosing the Right Mesh for Your Bifold Screen
Two screens for bifold doors can share the same housing and track and still feel quite different to live with. The mesh decides what stays out, how clearly you can see the garden and how much breeze gets into the room.
Matching Mesh to Your Household
Openness is the share of open space in the weave. Phantom Screens NZ publishes approximate openness figures for its own meshes, and they appear in the table below. The company notes that these figures describe the weave and are not measured airflow rates. Other makers' meshes will have different figures.
| Mesh type | What it is for | Effect on view and airflow | Trade-offs |
|---|---|---|---|
| Standard insect mesh | Flies, mosquitoes and spiders | Clear view and plenty of air. About 58% open in Phantom's range | Least resistant to claws and knocks |
| Pet-resistant mesh | Doorways that cats and dogs use | More visible and less open than standard mesh. About 45% open | Resists light damage from small pets but is not pet-proof. Fewer systems accept it |
| Fine (midge) mesh | Sandflies, midges and other tiny insects found near the coast and estuaries | Still high-visibility, with a little less airflow. About 48% open | Lets less breeze through than standard mesh |
| Solar or privacy mesh | Heat, glare and UV on sunny openings, plus daytime privacy | Darker, softer view out and in. 6% or 10% open | Much less airflow, and only some systems accept it |
Visibility Versus Protection
Every mesh involves a basic trade. US supplier Metro Screenworks puts it as a choice between durability and visibility: a stronger mesh usually gives a poorer view, and vice versa. It rates its own pet screen at seven times the strength of standard fibreglass, but it also says the pet screen is harder to see through. Denser weaves also let less air through, and they give more shade.
For this reason, people who want invisible screens for doors usually choose standard or high-visibility mesh on a retractable or pleated system. A light, open weave keeps the view closest to having no screen at all. When the screen is retracted, the housing hides the mesh completely.
Checking Mesh Compatibility with Your Screen System
Not every screen system accepts every mesh. Pleated screens often use their own dedicated pleated mesh. Phantom's pleated door screen, for example, has no alternative mesh and no pet-mesh option. Motorised and wider systems also need checking, because the housing size limits which fabrics they can take. In Phantom's range, outdoor privacy fabrics are listed only for its larger 140 mm and 180 mm motorised housings. Before you order, confirm with the screen maker which meshes your system accepts, and ask for physical samples so you can judge them in your own light.
If you're not sure which mesh to ask about, start with what your household needs most:
- Pets: pet-resistant mesh. Tell the supplier if your pet jumps or climbs.
- Coastal or bug-heavy areas: fine midge mesh for sandflies. In salt air, also ask about corrosion-resistant options such as stainless steel mesh.
- Strong afternoon sun: solar mesh for west-facing openings.
- Privacy from neighbours: solar or privacy mesh, which makes the room harder to see into during the day.
Any mesh other than standard can also limit which systems you can use, and it usually changes the price on the quote.
What Affects the Cost of Adding a Screen to a Bifold Door
Ask three suppliers to price a screen for the same opening and you may get three quite different figures. Most screens for bifold openings are made to size, so the price depends on choices covered earlier in this guide: the width, the screen type, the mesh and the fit at the threshold.
What Drives the Cost of a Bifold Door Screen
- Opening width: A wider opening needs more mesh, longer guides and a bigger housing. The price goes up with the span.
- Single versus double setup: Two screens meeting in the middle need two housings, a meeting stile and more fitting time. They cost more than one screen.
- Screen type: Magnetic curtains are the cheapest. Tracked retractable, pleated and framed systems cost more.
- Motorisation: A motor, controls and a power supply all add cost, and extras such as wind sensors add more.
- Mesh upgrades: Pet, midge, solar and privacy meshes usually cost more than standard insect mesh.
- Custom versus stock sizing: Stock sizes cost less but only fit openings that match them. Custom sizes cost more.
- Professional versus DIY installation: DIY saves on labour for a simple stock screen. Professional installation costs more but usually includes measuring. Angi notes that many door makers require professional installation to keep their warranty valid, so check whether your screen maker has a similar rule.
The site itself can also change a quote. San Diego installer Vanishing Screens adds 15 to 25% for second-storey work, 10 to 20% for difficult access and 10 to 20% for marine-grade materials on coastal homes. These figures come from one US company, and Australian labour rates and suppliers are different. They still show that an upper-storey deck or a beachside home can raise the price.
Why Door Prices Rarely Include the Screen
Bifold door prices are easy to find. Screen prices for the same opening are much harder to find. Angi's US cost guide for folding patio doors, for example, splits the price into width, material, glass, custom sizing, labour and permits. It has no line for a screen. When you compare aluminium bifold doors prices, assume the screen is not included unless the quote names it.
Getting Comparable Quotes
If you're pricing a new bifold door with screen included, ask for the screen as a separate line. That way you can compare it with a retrofit quote. Ask every supplier to list:
- Screen type and size
- Number of screens
- Mesh type
- Any changes to the threshold or sill
- Installation, including measuring
- Warranty terms for the frame, mesh and any motor
Read the warranty line carefully. Over the years a screen picks up grit in its tracks, flexes in the wind and takes knocks from pets. The warranty terms tell you what the supplier will fix when that happens.

Living with Bifold Screen Doors Over the Long Term
A screen that glides smoothly on day one can start to drag by its second summer. Usually nothing has broken. Bifold door screens wear down from grit, wind and everyday knocks, and a few regular habits keep them working.
Keeping Tracks and Guides Clean
Most operating problems start in the tracks. Every trip across the threshold drops sand, leaves and pet hair into the floor guide. US screen installer Central Florida Awnings warns that a single grain of sand in a track can push a screen off course. A short routine handles most of this:
- Vacuum the floor guide and side tracks with a soft brush or crevice tool.
- Wipe the channels with a damp cloth. Spray any cleaner onto the cloth, never straight into the track.
- Vacuum the mesh gently. Let it dry completely before you retract it, because damp mesh can stick together or grow mildew inside the housing.
- Near the coast, rinse off salt residue with fresh water more often than you would inland.
Generic advice is most likely to cause damage when it comes to lubrication. Screen suppliers commonly recommend a dry silicone spray and warn against wet lubricants and grease, which hold dirt. Your system may need something different, so follow the manufacturer's care and lubrication instructions before you buy any product.
Wind, Pets and Kids on Wide Spans
A wide mesh flexes in strong wind and catches gusts like a sail. Some systems are designed so the mesh pulls free of its tracks instead of tearing. Andersen says its retractable insect screen works this way, and you reset it by raising the screen fully and then lowering it again. Even if your screen can reset itself, retract it when strong wind is forecast, especially on exposed upper-storey decks.
Pets pawing at the mesh and kids running into a closed screen stretch the edges and wear the weave. If the mesh keeps popping out or tearing at the same height, ask whether your retractable screen system accepts a tougher pet-resistant mesh.
Fixing a Screen That Sticks, Sags or Will Not Latch
| Symptom | Likely cause | What to try |
|---|---|---|
| Screen sticks or drags | Grit in the tracks, a dry track, or a floor guide or frame that has moved out of level | Clean and lubricate as the maker directs. Check the side tracks with a spirit level. Call the installer if they have moved out of alignment |
| Mesh sags or wrinkles | Mesh pushed out of its track, or slack tension cords on a pleated screen | Retract the screen fully and draw it out again. Adjust pleated tension only as the installation manual describes |
| Double screens will not meet or latch | Dirt on the magnetic or latching edges, guides out of alignment, or a handle pulled from one end | Clean the meeting edges and operate each screen from the centre of the handle. Call the installer if a gap remains |
| Housing does not retract fully | Debris at the housing opening, mesh rolled up damp, or a weakened spring | Clean the housing opening, pull the mesh out fully, let it dry and guide it back by hand. Spring re-tensioning is a job for the maker or installer |
| Mesh is torn | Claws, sharp objects or impact | Treat a patch as temporary only. Replace the mesh or pleat pack, and check the warranty first |
Replacement options depend on the system. Many makers supply replacement mesh that an installer can fit. Others, including Andersen for the screen mentioned above, require a whole new screen once the mesh edges show during operation. Check the warranty before you open a housing or adjust the tension yourself.
Who you call for any of these repairs depends on how the screen was supplied. It may have come with the door from one supplier, or been added later by someone else.
Choosing Your Path and Planning Next Steps for Bifold Doors with Screens
Repairs, warranties and fitting all come back to the same question: did the screen arrive with the door, or was it added later? Your answer shapes almost every other decision.
Choosing Between a New Door and a Retrofit Screen
| Factor | New bifold door with a screen planned in | Screen added to an existing door |
|---|---|---|
| Screen choice | Wider. The mounting face, housing position and threshold can be designed around the screen | Limited by the installed frame, sill, reveal depth and where the panels stack |
| Measuring | Taken from project drawings and confirmed with the door and screen suppliers | Measured on site from the finished opening, using the screen maker's measuring sheet |
| Threshold impact | The floor guide can be planned with the door sill and finished floor levels | The guide has to sit on the existing sill, which may add a lip |
| Who coordinates | The door supplier, builder or designer, ideally as part of one order | The owner or the screen installer, working around the door as built |
| Warranty questions | Does one supplier cover both, or does each cover its own part? | Does fixing to the frame affect the door warranty, and who covers the screen? |
Special Cases Worth Flagging
A bifold patio door used as the main entrance faces more questions than one opening onto the back deck. Before you choose a screen, have everyday access, locking, the threshold and any exit requirements that apply under the NCC reviewed. Security depends on the whole assembly, including the locking hardware, glazing and installation. A screen across the front entry also needs to open easily from inside, and its floor guide adds to a threshold that may already be under scrutiny. On multi-residential or commercial projects, the building surveyor or certifier should confirm the arrangement.
Resources for Homeowners and Project Teams
Product pages for folding glass patio doors rarely say much about screens, so expect to ask questions. For a new opening, homeowners, architects and commercial project teams can review MEICHEN's MA80 Bifold Door. It is a non-thermally broken aluminium folding system with panels that stack to one side, listed double-glazing build-ups, Black Mall and other powder-coated finishes, and hardware chosen to suit each project. The double glazing does not make the frame thermally broken, and the page lists no screened package. Raise screen compatibility, sightlines and any front-entry use in your enquiry. Ask for opening dimensions, folding clearance and performance to be reviewed for your configuration. Also confirm the quote is for the MA80 and not the separately listed thermally broken MC80.
Before you order either the door or the screen, confirm the fold direction, the stacking side, the opening size and screen compatibility.
Bifold Patio Doors with Screens: Common Questions
1. Can you add a fly screen to an existing bifold door?
Usually, yes. A bifold screen is a separate unit with its own housing and guides, so it can often be fitted after the door is installed. How easy that is depends on the opening as it was built. A flat sill, square jambs, enough reveal depth and space clear of the folded panel stack make the job simple. A raised sill, a shallow reveal or handles that stick out into the screen's path make it harder. Before you buy a third-party screen, ask the door maker whether it offers its own screen and whether fixing anything to the frame affects the door warranty. Then measure using the screen maker's own measuring sheet, because sizing rules differ between systems.
2. What type of screen suits a very wide bifold opening?
Pleated (plisse) screens are the usual choice for wide multi-panel bifolds. The mesh folds into a slim stack, no spring pulls it back, and it generally runs in a shallow floor guide, so you keep most of the clear opening. Each maker sets its own maximum width. Once an opening is wider than that limit, you need two screens that close towards each other and meet in the centre. With two screens you can open either side, but the centre join has to be adjusted well to keep insects out. Retract a wide mesh when strong winds are forecast, especially on coastal homes and upper-storey decks.
3. Does the screen go inside or outside a bifold door?
It depends on which way the panels fold. The screen normally mounts on the face opposite the fold direction, so the folded glass and the mesh never need the same space. Outswing bifolds usually take an interior-mounted screen, which stays sheltered. Inswing bifolds usually need the screen outside, where it is exposed to Australian UV, rain and, near the coast, salt air. For an outside screen, ask for outdoor-rated frames and corrosion-resistant mesh. Also check the stacking side, because a side housing has to clear the folded panels and their handles and locks. If anyone in the household uses a wheelchair or walker, have the threshold checked as well.
4. How much does a screen add to the cost of a bifold door?
There is no single price, because most bifold screens are made to measure. The cost rises with wider openings, two-screen setups, tracked or motorised systems, upgraded meshes such as pet or solar types, custom sizing and professional installation. Upper-storey and coastal sites can push the price up further. Bifold door quotes often leave the screen out. To compare quotes on the same basis, ask each supplier to list screen type, size, number of screens, mesh, any sill changes, installation (supply only or supply and install) and warranty terms.
5. What should I confirm with a supplier before ordering a new bifold door with a screen?
Ask whether a compatible screen is offered for the frame or has been tested with it, which face it mounts on, whether you need one screen or two, how it changes the threshold, and who installs and warrants it. Product pages often leave out screen details. MEICHEN's MA80 Bifold Door is one example. It is a non-thermally broken aluminium folding system with double-glazing options, powder-coated finishes including Black Mall, and hardware chosen for each project. Its page lists no dedicated screened package, so treat screen compatibility and slim sightlines as questions to ask, not included features. Double glazing does not make the frame thermally broken. Opening dimensions, folding clearance and performance need review for your configuration. Confirm that the quote is for the MA80 and not the separately listed thermally broken MC80. If the bifold will be a main entrance, also have access, locking, thresholds and exit requirements reviewed.
